Wildlife Removal Before & After Photos

One day, this homeowner was cleaning out his shed to get ready for the summer. As he was cleaning it out, he saw a fox stick its head out from under his shed and then go back underneath it! He immediately went inside and called Little Rascals Nuisance Wildlife Removal for help. Once we arrived and examined the shed, we found the main burrow that the fox was using to go underneath the shed.

First, we dug a 12 inch deep trench and then installed hardware cloth around the entire perimeter of shed. The hardware cloth is installed 12 inches deep and 12 inches out from the bottom of the shed. This creates a sturdy "L shaped" perimeter that will prevent foxes, and other nuisance wildlife, from digging and nesting underneath the shed. Afterward, we cut a portion of the hardware cloth that was over the main burrow, installed a one-way device directly over it, and set up several baited devices nearby. The one-way device allows the fox to safely leave the shed, but prevent it from getting back in.

Once we retrieve the fox, we're going to relocate it to a new, humane location, fill in the burrow, and install another piece of hardware cloth over the opening. 

Now that we safely removed all the squirrels from this home in South Bound Brook, NJ and relocated them to a new, humane environment, we're going to prevent them from getting back in. The squirrels were able to infest the home through the builders gap. A builders gap is the gap between the fascia board, where the gutter is hung, and the roof decking. It's caused when roof decking is stopped too short and isn't flush with the fascia. The gap is meant to help with airflow throughout the attic, but also presents an opportunity for squirrels, as well as raccoons, birds, and bats, to infest the attic.

To exclude the squirrels, as well as any other nuisance wildlife or nuisance birds, we installed Pest-Blok over the builders gap. Pest-Blok doesn't restrict airflow, undergoes a silicone-protected polyester coating process that makes it last longer, and guards the home against squirrels, pests, birds, and all other nuisance wildlife.

Our Little Rascals team is at a home in Roosevelt, NJ, to safely remove a raccoon from the property. After a thorough inspection, we determined that the raccoon had ripped apart the soffit returns on the home and infested the attic. A soffit return, also known as an eave return or cornice return, is a architectural detail that occurs when the horizontal cornice of a roof connects to the rake of a gable. It's a feature of Neoclassical architecture where the roof eave on a gable end comes down to a point, then doubles back briefly.

In order to safely retrieve the raccoon, we installed a one-way device over the soffit returns and then temporarily enclosed the areas off with hardware cloth. We also setup several baited devices nearby. The one-way will allow the raccoon to safely leave the area, but is designed to prevent it from getting back in. After a short period of time, we had successfully retrieved the raccoon and relocated it to a new, humane location.

Before we left the home, we fashioned several pieces of sturdy metal flashing and installed them over the two soffit returns to prevent any future raccoons, as well as any other nuisance wildlife, from infesting the home. 

After we successfully removed all the bats from this home in Millstone, NJ, we're going to prevent them from getting back in. The bats were able to infest the home via the ridge vent.  A ridge vent is an air exhaust vent installed on the peak of a roof. When installing this vent, an air slot is first cut in the roof deck at the roof's peak. This air slot is then covered by the ridge vent itself. They help to provide continuous, uniform exhaust ventilation at the highest portion of the attic and are designed to help resist wind-driven rain and snow, as well as insect and debris infiltration.

To fix this, we installed Ridge-Guard®. Ridge-Guard® secures and reinforces the ridge vent shingles. Now, not only is the home properly secured from bats, but all nuisance wildlife too!

Recently, we were sent out to a home in Sayreville, NJ to handle a potential infestation of raccoons in the attic. As we started inspecting the property, we noticed that the attic fan was damaged. We took a closer look and found raccoon paw prints nearby and hair stuck in the attic fan. First, we installed a temporary attic fan cover over the attic fan and attached a two-gaited, heavy-duty device to it. The raccoons will have no other way to exit the area, except through our device, which will safely retrieve the raccoon. We also placed several baited traps nearby.

A short while later, we safely retrieved all the raccoons and safely relocated them to a new, humane environment. We then disinfected the attic and installed a sturdy attic fan cover over the attic fan. The attic fan cover is made of heavy-duty 18 Gauge expanded Galvannealed steel mesh and will prevent raccoons, as well as all nuisance wildlife, from gaining access into the home via the attic fan.